diff --git a/CHANGELOG b/CHANGELOG
index 549c4f9..0068947 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,328 @@
+commit e881cb563e32f45832b7b6db77bdcd017adcbb41
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date:	Fri Nov 2 13:15:42 2007 -0700
+
+    fix wording in README
+
+    Changed the wording to properly describe the shadowing
+    of the environment from ROM to RAM
+
+    Signed-off-by: Bruce Adler <bruce.adler@acm.org>
+
+commit ad845beef06245426c57b53dcdc01b7dc70e0d45
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Wed Oct 31 02:18:15 2007 +0900
+
+    blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ec22755799466c8a103664bb3a5e647bf9c238f4
+Author: Vlad Lungu <vlad@comsys.ro>
+Date:	Thu Oct 25 16:08:14 2007 +0300
+
+    Trimmed some variables in ne2000.c
+
+    Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date:	Thu Oct 25 17:51:27 2007 +0800
+
+    Fix the issue of usb_kbd driver missing the scan code of key 'z'.
+
+    The scan code of the key 'z' is 0x1d, which should be handled.
+
+    The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
+    controller.
+
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date:	Thu Oct 25 17:30:04 2007 +0800
+
+    Fix USB support issue for MPC8641HPCN board.
+
+    The configuration file has already enabled USB, but it
+    missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
+    on MPC8641HPCN can not work because of the wrong USB
+    register endian.
+
+    And add the USB command to U-Boot commands list.
+
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4e62041023dc3de9d98d977bb080235bc6d035e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Oct 24 18:16:01 2007 +0200
+
+    Use config_cmd_default.h instead of config_cmd_all.h
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 56622f87857439b1c221e9deef11a9d5bb5d4308
+Author: Marian Balakowicz <m8@semihalf.com>
+Date:	Wed Oct 24 01:37:36 2007 +0200
+
+    TQM5200: Call usb_cpu_init() during board init
+
+    usb_cpu_init() configures GPS USB pins, clocks, etc. and
+    is required for proper operation of kernel USB subsystem.
+    This setup was previously done in the kernel by the fixup
+    code which is being removed, thus low level init must be
+    done by U-boot now.
+
+    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Tue Oct 23 16:25:50 2007 +0200
+
+    Fix typo in nfs.c
+
+    An obvious typo. Originally fixed in linkstation u-boot port.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Tue Oct 23 14:35:05 2007 +0200
+
+    Fix a typo in cpu/mpc824x/interrupts.c
+
+    Since December 2003 the timer_interrupt_cpu() function in
+    cpu/mpc824x/interrupts.c contains what seems to be a superfluous
+    parameter. Remove it.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date:	Wed Oct 17 11:13:51 2007 +0200
+
+    add ft_cpu_setup(..) on mpc8260
+
+    Add ft_cpu_setup(..)-function to adapt it for use with libfdt
+    based on code from mpc5xxx
+
+    Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+    --
+
+commit 6abd82e19ae93c0b4d104e50165e235915ec0875
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date:	Wed Oct 17 11:18:42 2007 +0200
+
+    changes for IDS8247 board support
+
+    To get the IDS8247 board working following are done:
+     - FCC2 is deactivated
+     - FCC1 is activated
+     - I2C is activated
+     - CFI driver is activated
+     - Adapted for use with LIBFDT
+
+    Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+    --
+
+commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Wed Oct 24 15:48:37 2007 +0200
+
+    ATSTK1002: Remove default ethernet addresses
+
+    Wolfgang is right: It's not a good idea to set up default initial
+    ethernet addresses for a board, even though they belong to the local
+    range.
+
+    This will change the failure mode from "IT manager screams at you for
+    using duplicate ethernet addresses" to a nice error message explaining
+    that the ethernet address hasn't been set properly.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e5c794e491a57d829b6d8733e2ed8368a2269abf
+Author: Justin Flammia <jflammia@savantav.com>
+Date:	Mon Oct 29 17:40:35 2007 -0400
+
+    DHCP Client Fix
+
+    This is a multi-part message in MIME format.
+
+    commit e6e505eae94ed721e123e177489291fc4544b7b8
+    Author: Justin Flammia <jflammia@savantav.com>
+    Date:   Mon Oct 29 17:19:03 2007 -0400
+
+	Found a bug in the way the DHCP Request packet is built, where the IP address
+	that is offered by the server is bound to prematurely. This patch is a fix of
+	that bug where the IP address offered by the DHCP server is not used until
+	after the DHCP ACK from the server is received.
+
+    Signed-off-by: Justin Flammia <jflammia@savantav.com>
+    Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Oct 25 17:16:22 2007 -0500
+
+    ColdFire 54455: Fix correct boot location for atmel and intel
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Oct 25 17:14:00 2007 -0500
+
+    ColdFire: Fix build error when CONFIG_WATCHDOG is defined
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit c67e12e705b204cfe914e3e3e693d69a445dcabf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Oct 25 17:12:36 2007 -0500
+
+    ColdFire 5329: Assign correct SDRAM size and fix cache
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Oct 25 17:10:23 2007 -0500
+
+    ColdFire 5253: Assign correct SDRAM size
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2acefa72ee0026f862ab65597ca687428f63a973
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Oct 25 17:09:17 2007 -0500
+
+    ColdFire 5282: Fix external flash boot and return dramsize
+
+    Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Thu Oct 25 17:20:01 2007 +0200
+
+    TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
+Author: Martin Krause <martin.krause@tqs.de>
+Date:	Wed Oct 24 08:42:25 2007 +0200
+
+    TQM5200: fix spurious characters on second serial interface
+
+    With this patch PSC3 is configured as UART. This is done, because if
+    the pins of PSC3 are not configured at all (-> all pins are GPI),
+    due to crosstalk, spurious characters may be send over the RX232_2_TXD
+    signal line.
+
+    Signed-off-by: Martin Krause <martin.krause@tqs.de>
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit be4a87f11e297a5cededbf7dd71c0248f3874acd
+Author: Martin Krause <martin.krause@tqs.de>
+Date:	Wed Oct 24 08:41:27 2007 +0200
+
+    TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+    Some commands for the STK52xx base board try to access the SM501 grafic
+    controller. But the TQM5200S has no grafic controller (only the TQM5200
+    and the TQM5200B have). This patch deactivates the commands accessing
+    the SM501 for the TQM5200S.
+
+    Signed-off-by: Martin Krause <martin.krause@tqs.de>
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b31f64343ead9482cd439b1adbe4c34026a641b1
+Author: Martin Krause <martin.krause@tqs.de>
+Date:	Mon Oct 22 16:45:53 2007 +0200
+
+    TQM5200: fix spurious characters on second serial interface
+
+    With this patch PSC3 is configured as UART. This is done, because if
+    the pins of PSC3 are not configured at all (-> all pins are GPI),
+    due to crosstalk, spurious characters may be send over the RX232_2_TXD
+    signal line.
+
+    Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
+Author: Martin Krause <martin.krause@tqs.de>
+Date:	Mon Oct 22 16:40:06 2007 +0200
+
+    TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+    Some commands for the STK52xx base board try to access the SM501 grafic
+    controller. But the TQM5200S has no grafic controller (only the TQM5200
+    and the TQM5200B have). This patch deactivates the commands accessing
+    the SM501 for the TQM5200S.
+
+    Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Oct 21 09:14:28 2007 +0200
+
+    Mips: Fix string functions differ prototype declaration
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Fri Oct 19 17:51:40 2007 -0500
+
+    fsl_pci_init enable COMMAND_MEMORY if inbound window
+
+    Patch 16e23c3f removed PCSRBAR allocation.	But passing zero windows
+    to pciauto_setup_device has the side effect of not getting
+    COMMAND_MEMORY set.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e9d0d527992566ebef9826962ff1745b2f082b92
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 19 10:55:24 2007 +0200
+
+    delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 19 08:10:15 2007 +0200
+
+    fix warning: no return statement in function returning non-void
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e78220f6e514206757acfe247297fc9a328a881f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 19 06:33:45 2007 +0200
+
+    xsengine: Fix no partition type specified, use DOS as default
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 19 00:24:59 2007 +0200
+
+    lubbock: Fix no partition type specified, use DOS as default
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Oct 23 16:50:03 2007 +0200
+
+    Coding style: keep lists sorted; update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 Date:	Fri Oct 19 00:09:05 2007 +0200
@@ -51,6 +376,112 @@
     are added to u-boot.
     Signed-off-by Rune Torgersen <runet@innovsys.com>
 
+commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Tue Oct 23 13:14:10 2007 +0200
+
+    Motion-PRO: Update configuration to accomodate next generation board.
+
+    New board has faster oscillator and a different Flash chip. This affects:
+    - CFG_MPC5XXX_CLKIN
+    - SDRAM timings
+    - Flash CS configuration (timings)
+    - Flash sector size, and thus MTD partition layout
+    - malloc() arena size (due to bigger Flash sectors)
+    - smaller memory test range (due to bigger malloc() arena)
+
+    This patch also enables more extensive memory testing via "mtest".
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit eff501904df2bf1724a750062628ba2c51dbb1f8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Tue Oct 23 11:36:07 2007 +0200
+
+    Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
+
+    Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
+    register must be written a value of 0x00000004 as the first step of the
+    SDRAM contorller configuration.
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
+Author: Peter Pearse <peter.pearse@arm.com>
+Date:	Tue Oct 23 10:22:16 2007 +0100
+
+    Move PL01* serial drivers to drivers/serial and adjust Makefiles.
+
+commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
+Author: Vlad Lungu <vlad@comsys.ro>
+Date:	Sun Oct 21 22:10:10 2007 +0900
+
+    [MIPS] Fix UNCACHED_SDRAM
+
+    PHYSADDR is for physical address, KSEG1ADDR is for uncached.
+
+    Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 00101dd7a32d12f698150123e47e4b3420279f86
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date:	Sun Oct 21 21:30:42 2007 +0900
+
+    [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
+
+    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit eb700636db017d310edaeb559b13d82588560674
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date:	Sun Oct 21 10:55:37 2007 +0900
+
+    [MIPS] u-boot.lds: Define _gp in a standard manner
+
+    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date:	Sun Oct 21 10:55:36 2007 +0900
+
+    [MIPS] Fix $gp usage
+
+    Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
+    As a general principle, we should use _gp for $gp.
+
+    Thanks to linker script's help we fortunately have _gp which equals to
+    _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
+    be able to access to GOT entires, global variables and procedure entry
+    points. The right thing to do is to use _gp.
+
+    This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
+    which holds the offset from _gp. When updating GOT entries, we use this
+    offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
+
+    This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
+    I made some change to leave over num_got_entries.
+
+    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+    Cc: Vlad Lungu <vlad@comsys.ro>
+
+commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date:	Sun Oct 21 10:55:36 2007 +0900
+
+    [MIPS] u-boot.lds: Fix __got_start and __got_end
+
+    Ensure that __got_start points to top of the `.got', and __got_end points
+    to bottom as well, so that we never fail to count num_got_entries.
+
+    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date:	Sun Oct 21 10:55:36 2007 +0900
+
+    [MIPS] u-boot.lds: Remove duplicated .sdata section
+
+    Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Sun Oct 21 01:01:17 2007 +0200
@@ -73,6 +504,84 @@
 
     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
 
+commit df90968b48fb34fa9072fab150db2ac89678f537
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date:	Mon Sep 24 13:32:13 2007 -0400
+
+    Setting MSR[DE] in do_reset
+
+    Hello,
+       This patch ensures the soft reset of the board for the 85xx boards
+       by setting the MSR[DE] in the do_reset function.
+
+    Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date:	Mon Sep 24 13:36:01 2007 -0400
+
+    MSR overwrite fix
+
+    Hello,
+      This patch fixes the MSR overwrite in the start.S when moving out of
+      the last 4K page.
+
+    Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
+Author: Dan Wilson <dwilson@fulcrummicro.com>
+Date:	Fri Oct 19 11:33:48 2007 -0500
+
+    tsec driver should clear RHALT on startup
+
+    This was causing problems for some people.
+
+    Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
+    Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 11 00:29:18 2007 -0500
+
+    Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
+
+    On the MPC85xx CDS we have two issues:
+
+    1. The device tree fixup code did not check to see if the property we are
+    trying to update is actually found.  Its possible that it would update
+    random memory starting at 0.
+
+    2. Newer Linux kernel's have moved the location of the PCI nodes to be
+    sibilings of the soc node and not children.  The explicit PATH to the PCI
+    node would not be found for these device trees.  Add the ability to handle
+    both paths.  In the future we shouldn't handle such fixups by explicit path.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3063eec775719b7e91023bbec3f64b3118791df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 11 00:18:48 2007 -0500
+
+    Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
+
+    On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
+    console.  Make it so we match that config what we tell Linux as the early
+    STDOUT console.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e1ce3cb617bb06f91f82f98915391175addf3e82
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 2 11:12:27 2007 -0500
+
+    Remove magic numbers from cache related operations for mpc85xx
+
+    The mpc85xx start code uses some magic numbers that we actually
+    have #defines for in <config.h> so use those instead.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
 Author: Detlev Zundel <dzu@denx.de>
 Date:	Fri Oct 19 16:47:26 2007 +0200
@@ -409,6 +918,16 @@
 
     Signed-off-by: Stefan Roese <sr@denx.de>
 
+commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Sep 26 16:35:54 2007 -0500
+
+    85xx io out functions need sync after write.
+
+    This fixes the mc146818 rtc_read/write functions for 85xx.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
 Author: Grant Likely <grant.likely@secretlab.ca>
 Date:	Tue Sep 25 15:48:05 2007 -0600
diff --git a/README b/README
index 09eb76f..3dad5fc 100644
--- a/README
+++ b/README
@@ -2123,7 +2123,7 @@
 	to be a good choice since it makes it far enough from the
 	start of the data area as well as from the stack pointer.
 
-Please note that the environment is read-only as long as the monitor
+Please note that the environment is read-only until the monitor
 has been relocated to RAM and a RAM copy of the environment has been
 created; also, when using EEPROM you will have to use getenv_r()
 until then to read environment variables.
diff --git a/blackfin_config.mk b/blackfin_config.mk
index df324b7..f71a313 100644
--- a/blackfin_config.mk
+++ b/blackfin_config.mk
@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
+PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__BLACKFIN__
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index 19823a4..b05424d 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -25,6 +25,12 @@
 #include <ioports.h>
 #include <mpc8260.h>
 
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -38,12 +44,12 @@
 
     /* Port A configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
-	/* PA30 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
-	/* PA29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
-	/* PA28 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
-	/* PA27 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
-	/* PA26 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
+	/* PA31 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
+	/* PA30 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
+	/* PA29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
+	/* PA28 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
+	/* PA27 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
+	/* PA26 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
 	/* PA25 */ {   0,   0,	 0,   0,   1,	0   }, /* 8247_P0 */
 #if defined(CONFIG_SOFT_I2C)
 	/* PA24 */ {   1,   0,	 0,   0,   1,	1   }, /* I2C_SDA2 */
@@ -53,14 +59,14 @@
 	/* PA23 */ {   0,   0,	 0,   1,   0,	0   }, /* PA23 */
 #endif
 	/* PA22 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_DCD */
-	/* PA21 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
-	/* PA20 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
-	/* PA19 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
-	/* PA18 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
-	/* PA17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
-	/* PA16 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
-	/* PA15 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
-	/* PA14 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
+	/* PA21 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
+	/* PA20 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
+	/* PA19 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
+	/* PA18 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
+	/* PA17 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
+	/* PA16 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
+	/* PA15 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
+	/* PA14 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
 	/* PA13 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_RTS */
 	/* PA12 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_CTS */
 	/* PA11 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_DTR */
@@ -79,20 +85,20 @@
 
     /* Port B configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
+	/* PB31 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
+	/* PB26 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
 	/* PB17 */ {   0,   0,	 0,   0,   0,	0   }, /* PB17 */
 	/* PB16 */ {   0,   0,	 0,   0,   0,	0   }, /* PB16 */
 	/* PB15 */ {   0,   0,	 0,   0,   0,	0   }, /* PB15 */
@@ -123,8 +129,8 @@
 	/* PC26 */ {   0,   0,	 0,   1,   0,	0   }, /* PC26 */
 	/* PC25 */ {   0,   1,	 1,   0,   0,	0   }, /* SYNC_IN */
 	/* PC24 */ {   0,   0,	 0,   1,   0,	0   }, /* PC24 */
-	/* PC23 */ {   0,   1,	 0,   1,   0,	0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,	 0,   0,   0,	0   }, /* ATMRFCLK */
+	/* PC23 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII TX_CLK */
+	/* PC22 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII RX_CLK */
 	/* PC21 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN RXCLK */
 	/* PC20 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN TXCLK */
 	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_CLK */
@@ -180,7 +186,7 @@
 	/* PD10 */ {   0,   0,	 0,   0,   0,	0   }, /* PD10 */
 	/* PD9	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD9 */
 	/* PD8	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD8 */
-	/* PD7	*/ {   0,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
+	/* PD7	*/ {   1,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
 	/* PD6	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD6 */
 	/* PD5	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD5 */
 	/* PD4	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD4 */
@@ -224,7 +230,7 @@
 	 * mapped by the controller. That means, that the initial mapping has
 	 * to be (at least) twice as large as the maximum expected size.
 	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
+	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
 
 	sdmr_ptr = &memctl->memc_psdmr;
 	orx_ptr = &memctl->memc_or2;
@@ -315,4 +321,38 @@
 	printf ("%4lu MB\n", totlen >>20);
 }
 
-#endif
+#endif	/* CFG_CMD_NAND */
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+/*
+ * update "memory" property in the blob
+ */
+void ft_blob_update(void *blob, bd_t *bd)
+{
+	int ret, nodeoffset = 0;
+	ulong memory_data[2] = {0};
+
+	memory_data[0] = cpu_to_be32(bd->bi_memstart);
+	memory_data[1] = cpu_to_be32(bd->bi_memsize);
+
+	nodeoffset = fdt_find_node_by_path (blob, "/memory");
+	if (nodeoffset >= 0) {
+		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
+					sizeof(memory_data));
+	if (ret < 0)
+		printf("ft_blob_update): cannot set /memory/reg "
+			"property err:%s\n", fdt_strerror(ret));
+	}
+	else {
+		/* memory node is required in dts */
+		printf("ft_blob_update(): cannot find /memory node "
+		"err:%s\n", fdt_strerror(nodeoffset));
+	}
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup( blob, bd);
+	ft_blob_update(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index d10cb59..da4e228 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -441,15 +441,21 @@
 }
 #endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
 
-#ifdef CONFIG_PS2MULT
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {
+#ifdef CONFIG_PS2MULT
 	ps2mult_early_init();
+#endif /* CONFIG_PS2MULT */
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+	/* Low level USB init, required for proper kernel operation */
+	usb_cpu_init();
+#endif
+
 	return (0);
 }
 #endif
-#endif /* CONFIG_PS2MULT */
 
 #ifdef CONFIG_FO300
 int silent_boot (void)
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index aec558a..7bdfcc0 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -257,7 +257,7 @@
 		repeat_delay=REPEAT_DELAY;
 	}
 	keycode=0;
-	if((scancode>3) && (scancode<0x1d)) { /* alpha numeric values */
+	if((scancode>3) && (scancode<=0x1d)) { /* alpha numeric values */
 		keycode=scancode-4 + 0x61;
 		if(caps_lock)
 			keycode&=~CAPITAL_MASK; /* switch to capital Letters */
diff --git a/config.mk b/config.mk
index 582df32..37d61a0 100644
--- a/config.mk
+++ b/config.mk
@@ -69,10 +69,6 @@
 endif
 endif
 
-ifeq ($(ARCH),blackfin)
-PLATFORM_CPPFLAGS+= -D__BLACKFIN__
-endif
-
 ifdef	ARCH
 sinclude $(TOPDIR)/$(ARCH)_config.mk	# include architecture dependend rules
 endif
diff --git a/cpu/mpc824x/interrupts.c b/cpu/mpc824x/interrupts.c
index acb8947..4359ecc 100644
--- a/cpu/mpc824x/interrupts.c
+++ b/cpu/mpc824x/interrupts.c
@@ -86,7 +86,7 @@
  vga?
  */
 
-void timer_interrupt_cpu (struct pt_regs *regs, ulong timestamp)
+void timer_interrupt_cpu (struct pt_regs *regs)
 {
 	/* nothing to do here */
 	return;
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index 94651dc..c2b753d 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -47,6 +47,11 @@
 #include <asm/processor.h>
 #include <asm/cpm_8260.h>
 
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_GET_CPU_STR_F)
@@ -294,3 +299,36 @@
 #endif /* CONFIG_WATCHDOG */
 
 /* ------------------------------------------------------------------------- */
+#if defined(CONFIG_OF_LIBFDT)
+static void do_fixup(void *fdt, const char *node, const char *prop,
+			const void *val, int len, int create)
+{
+#if defined(DEBUG)
+	int i;
+	debug("Updating property '%s/%s' = ", node, prop);
+	for (i = 0; i < len; i++)
+		debug(" %.2x", *(u8*)(val+i));
+	debug("\n");
+#endif
+	int rc = fdt_find_and_setprop(fdt, node, prop, val, len, create);
+	if (rc)
+		printf("Unable to update property %s:%s, err=%s\n",
+			node, prop, fdt_strerror(rc));
+}
+
+static void do_fixup_u32(void *fdt, const char *node, const char *prop,
+			 u32 val, int create)
+{
+	val = cpu_to_fdt32(val);
+	do_fixup(fdt, node, prop, &val, sizeof(val), create);
+}
+
+void ft_cpu_setup (void *blob, bd_t *bd)
+{
+	char * cpu_path = "/cpus/" OF_CPU;
+
+	do_fixup_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
+	do_fixup_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
+}
+#endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index ada6ea5..b769ef8 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -268,7 +268,7 @@
 	 */
 	lis	r3,CFG_INIT_RAM_ADDR@h
 	ori	r3,r3,CFG_INIT_RAM_ADDR@l
-	li	r2,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE)) 
+	li	r2,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
 	mtctr	r2
 	li	r0,0
 1:
@@ -1061,7 +1061,7 @@
 	/* invalidate the INIT_RAM section */
 	lis	r3,(CFG_INIT_RAM_ADDR & ~31)@h
 	ori	r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l
-	li	r4,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE)) 
+	li	r4,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
 	mtctr	r4
 1:	icbi	r0,r3
 	dcbi	r0,r3
diff --git a/drivers/ne2000.c b/drivers/ne2000.c
index 695a1dc..c978d62 100644
--- a/drivers/ne2000.c
+++ b/drivers/ne2000.c
@@ -723,7 +723,8 @@
 	{ /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
 	{ /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
 	{ /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
-	{ /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
+	{ /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 },
+	{ /* Qemu */ 0x0, 0x52, 0x54, 0x00, 0 }
 };
 
 #define NR_INFO		(sizeof(hw_info)/sizeof(hw_info_t))
@@ -824,30 +825,22 @@
 
 /* U-boot specific routines */
 
-#define NB 5
 
 static unsigned char *pbuf = NULL;
-static int plen[NB];
-static int nrx = 0;
 
 static int pkey = -1;
 static int initialized=0;
 
 void uboot_push_packet_len(int len) {
-	PRINTK("pushed len = %d, nrx = %d\n", len, nrx);
+	PRINTK("pushed len = %d\n", len);
 	if (len>=2000) {
 		printf("NE2000: packet too big\n");
 		return;
 	}
-	if (nrx >= NB) {
-		printf("losing packets in rx\n");
-		return;
-	}
-	plen[nrx] = len;
-	dp83902a_recv(&pbuf[nrx*2000], len);
+	dp83902a_recv(&pbuf[0], len);
 
 	/*Just pass it to the upper layer*/
-	NetReceive(&pbuf[nrx*2000], plen[nrx]);
+	NetReceive(&pbuf[0], len);
 }
 
 void uboot_push_tx_done(int key, int val) {
@@ -862,9 +855,9 @@
 	PRINTK("### eth_init\n");
 
 	if (!pbuf) {
-		pbuf = malloc(NB*2000);
+		pbuf = malloc(2000);
 		if (!pbuf) {
-			printf("Cannot allocate rx buffers\n");
+			printf("Cannot allocate rx buffer\n");
 			return -1;
 		}
 	}
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
index 77938b1..c45c395 100644
--- a/include/configs/ADNPESC1.h
+++ b/include/configs/ADNPESC1.h
@@ -574,38 +574,30 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_KGDB
-#undef CONFIG_CMD_NAND
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DISPLAY
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_REISER
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 #undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PCI
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_VFD
-#undef CONFIG_CMD_USB
 #undef CONFIG_CMD_XIMG
 
-#if (CFG_NIOS_CPU_SPI_NUMS != 1)
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_DATE
+#if (CFG_NIOS_CPU_SPI_NUMS == 1)
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_SPI
 #endif
 
 /*------------------------------------------------------------------------
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index 0ddf0e3..eb78080 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -459,38 +459,27 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_BSP
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_DATE
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_KGDB
-#undef CONFIG_CMD_NAND
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DISPLAY
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 #undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PCI
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_VFD
-#undef CONFIG_CMD_USB
 #undef CONFIG_CMD_XIMG
 
-
 /*------------------------------------------------------------------------
  * COMPACT FLASH
  *----------------------------------------------------------------------*/
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index 0032fd3..bd36071 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -466,38 +466,25 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_ASKENV
-#undef COND_CMD_BEDBUG
-#undef COND_CMD_BMP
-#undef COND_CMD_BSP
-#undef COND_CMD_CACHE
-#undef COND_CMD_DATE
-#undef COND_CMD_DOC
-#undef COND_CMD_DTT
-#undef COND_CMD_EEPROM
-#undef COND_CMD_ELF
-#undef COND_CMD_FAT
-#undef COND_CMD_FDC
-#undef COND_CMD_FDOS
-#undef COND_CMD_HWFLOW
-#undef COND_CMD_IDE
-#undef COND_CMD_I2C
-#undef COND_CMD_JFFS2
-#undef COND_CMD_KGDB
-#undef COND_CMD_NAND
-#undef COND_CMD_NFS
-#undef COND_CMD_MMC
-#undef COND_CMD_MII
-#undef COND_CMD_PCI
-#undef COND_CMD_PCMCIA
-#undef COND_CMD_SCSI
-#undef COND_CMD_SPI
-#undef COND_CMD_VFD
-#undef COND_CMD_USB
-#undef COND_CMD_XIMG
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DISPLAY
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_REISER
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
 
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
 
 /*------------------------------------------------------------------------
  * KGDB
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 85d2bb3..bb87fae 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -120,6 +120,17 @@
 
 #define CFG_NS16550_COM1        (CFG_UART_BASE + 0x8000)
 
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU	"PowerPC,8247@0"
+#define OF_SOC	"soc@f0000000"
+#define OF_TBCLK	(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH	"/soc@f0000000/serial8250@e0008000"
+
+
 /*
  * select ethernet configuration
  *
@@ -133,16 +144,18 @@
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC       */
 #define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC       */
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */
-#define	CONFIG_ETHER_INDEX    2		/* which SCC/FCC channel for ethernet */
+#define	CONFIG_ETHER_INDEX	1	/* which SCC/FCC channel for ethernet */
+#define CONFIG_ETHER_ON_FCC1
+#define FCC_ENET
 
 /*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
+ * - Rx-CLK is CLK10
+ * - Tx-CLK is CLK9
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9)
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -166,6 +179,8 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR		0x51
 
 /*
  * Command line configuration.
@@ -211,7 +226,10 @@
  */
 #define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
-
+#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
+#define CFG_FLASH_BANKS_LIST	{ 0xFF800000 }
+#define CFG_MAX_FLASH_BANKS_DETECT	1
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
  * The main FLASH is whichever is connected to *CS0.
@@ -227,7 +245,7 @@
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
 #define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
@@ -511,12 +529,12 @@
 */
 #define CFG_OR2    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI0_A10             |\
+			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR  (PSDMR_SDAM_A13_IS_A5 |\
+#define CFG_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A15_A17           |\
-			 PSDMR_SDA10_PBI0_A11         |\
+			 PSDMR_SDA10_PBI0_A10		|\
 			 PSDMR_RFRC_5_CLK               |\
 			 PSDMR_PRETOACT_2W              |\
 			 PSDMR_ACTTORW_2W               |\
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 46edd08..e92069b 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -87,37 +87,23 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_BSP
-#undef CONFIG_CMD_DISPLAY
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_EXT2
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_IRQ
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_KGDB
-#undef CONFIG_CMD_MFSL
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_PCI
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_UNIVERSE
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_VFD
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 #undef CONFIG_CMD_XIMG
 
 #if !(CONFIG_LANTEC >= 2)
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index ba050cb..db30958 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -278,7 +278,7 @@
  * FLASH organization
  */
 #ifdef CFG_ATMEL_BOOT
-#	define CFG_FLASH_BASE		CFG_CS0_BASE	
+#	define CFG_FLASH_BASE		CFG_CS0_BASE
 #	define CFG_FLASH0_BASE		CFG_CS0_BASE
 #	define CFG_FLASH1_BASE		CFG_CS1_BASE
 #	define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 713518d..23508f9 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -209,35 +209,25 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_BSP
-#undef CONFIG_CMD_DATE
-#undef CONFIG_CMD_DISPLAY
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_EXT2
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_KGDB
-#undef CONFIG_CMD_MFSL
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_SNTP
-#undef CONFIG_CMD_UNIVERSE
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_VFD
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+
 #undef CONFIG_CMD_XIMG
 
 #if CONFIG_ADSTYPE == CFG_8272ADS
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 7d8a380..aa6dbc4 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -346,6 +346,7 @@
 #define CFG_USB_EVENT_POLL	1
 #define CFG_USB_OHCI_SLOT_NAME 	"ohci_pci"
 #define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_OHCI_SWAP_REG_ACCESS	1
 
 #if !defined(CONFIG_PCI_PNP)
     #define PCI_ENET0_IOADDR	0xe0000000
@@ -544,6 +545,7 @@
     #define CONFIG_CMD_PCI
     #define CONFIG_CMD_SCSI
     #define CONFIG_CMD_EXT2
+    #define CONFIG_CMD_USB
 #endif
 
 
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 2f6de81..fa32e33 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -105,36 +105,31 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_BSP
-#undef CONFIG_CMD_DATE
-#undef CONFIG_CMD_DISPLAY
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EXT2
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_IRQ
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_MFSL
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_PCI
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_KGDB
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+
 #undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_SNTP
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_UNIVERSE
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_VFD
 #undef CONFIG_CMD_XIMG
 
-
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 025c249..490db5f 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -303,38 +303,29 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_BSP
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 #undef CONFIG_CMD_DCR
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_DISPLAY
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_EXT2
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_KGDB
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_MFSL
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_PCI
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_UNIVERSE
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_VFD
 #undef CONFIG_CMD_XIMG
 
-
 /* Where do the internal registers live? */
 #define CFG_IMMR               0xF0000000
 #define CFG_DEFAULT_IMMR       0x00010000
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 2547afb..01e7970 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -185,33 +185,34 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
+#include <config_cmd_default.h>
 
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_DISPLAY
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_EXT2
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_KGDB
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_MFSL
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_PCI
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_UNIVERSE
-#undef CONFIG_CMD_VFD
 #undef CONFIG_CMD_XIMG
 
-
 #ifdef DEBUG
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
diff --git a/net/bootp.c b/net/bootp.c
index cfe6f8d..55dcc81 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -979,7 +979,6 @@
 {
 	BootpRequest();
 }
-#endif
+#endif	/* CONFIG_CMD_DHCP */
 
-#endif
-
+#endif	/* CONFIG_CMD_NET */
diff --git a/net/nfs.c b/net/nfs.c
index df2caac..1b27c97 100644
--- a/net/nfs.c
+++ b/net/nfs.c
@@ -405,7 +405,6 @@
 
 	if (rpc_pkt.u.reply.rstatus  ||
 	    rpc_pkt.u.reply.verifier ||
-	    rpc_pkt.u.reply.astatus  ||
 	    rpc_pkt.u.reply.astatus) {
 		return -1;
 	}